FDK’s ECM15P Series Ultra Capacitor Modules Offer Superior Thermal Performance and Long Life for Vehicles

FDK Corporation, a global electronic component and battery manufacturer, introduces the new ECM15P series EneCapTen ultra capacitor modules for use in vehicles. The ECM15P provides high power with long life and best-in-class thermal performance of up to 80 degrees Celsius. FDK will be exhibiting its ultra capacitors and other electronic products at ELECTRONICA 2008, booth number 348, Hall B2, to be held at the New Munich Trade Fair Centre in Germany from November 11 to 14, 2008.

FDK’s 15 volt (V) ultra capacitors are modularized versions of its original high-capacity EneCapTen capacitor cells for vehicle use. These capacitors have a long cycle life of over 500,000 cycles, a high power density relative to batteries, and an efficiency rating of 99.9%. Although only 260×210x60mm in size, they have 525 farads (F) of capacitance, 10.5 watt hours (Wh) of energy capacity, and 5 kilowatts (kW) of maximum power. As these modules can charge and discharge both by a high power supply of several hundred amperes and a low power supply, they have many applications for use in vehicles.

By using the ECM15P Series, it is possible to set up the following systems.

* Set up a compact idling stop system which can regenerate electric power during deceleration.
* Extend the product life of lead acid batteries or lithium ion batteries which are used alternately or simultaneously with the ECM ultra capacitor.
* Because of its good thermal performance, the ECM 15P can be placed near the engine, thus reducing the length of the electric wires and the resistance loss.

The ECM15P modules are environmentally friendly, safe, and secure. They do not use heavy metals or flammable materials thus they will not rupture and ignite. They are equipped with balance circuits to equalize each cell’s voltage, protection circuits to prevent over charge and discharge, and have an advanced power management system with microcomputer control as standard equipment.

FDK can meet a wide variety of customer needs through its integrated production system that takes the product from cell production to electric circuit design, circuit implementation, and module assembly. Samples will be available in November. For more information, please e-mail us.

See FDK at Electronica, Booth 348 Hall B2

Photos and release sheet available http://www.fdkamerica.com/press/re20081031.htm